商品介紹

MPP-100 Micro Pick and Place Simple System

經濟型單細胞/微粒子挑選移轉系統

Controlling ultrasmall volumes (picoliter range) easily

Photo: MPP-100  Micro Pick and Place Simple System

- PicoPipet, pico-pipetting device 　

- PicoPipet holder 40 mm 

 

 

應用:

• Picking and placing micro targets (> 5 um) for transferring them.

      o Single cells/cell colonies

         - single cells into PCR tubes

         - circulating tumor cells (CTCs) on microdevices

                - and other cells/colonies

      o Microorganisms

                 - Algae

                 - Fungi

                 - Yeasts

                 - Parasites

                 - And other microooganisms

      o Microdrops

      o Protein crystals

      o Metal particles

      o And MORE

      o *The targets must be in non-adherent status

 

• Micro liquid applying/spotting at the picoliter level.

 

特點: 

The Micro Pick and Place System makes it possible to transfer micro targets such as single cells one by one from one place to another place observing the targets with a microscope. The system is based on the PicoPipet that has a small electroosmotic pump in its pipette part. It allows users to operate the system intuitively and anyone can easily control suction/hold/discharge of ultra small volumes (picoloter range).

 

Example) Picking up a single cell from a dish and discharging the single cell into a PCR tube.

 

Videos of the Micro Pick and Place Systems

1)	MPP-300 Micro Pick and Place Standard System Glass micropipette: straight shape
	Blue beads (70-80 um) are picked up one by one and discharged at intended positions one by one observing the beads with the Compass video microscope
2)	MPP-300Z Micro Pick and Place Compass Z System 1-PCR8T-1 PCR 8-tube strip holder Glass micropipette: S shape
	Gel beads (about 10 um) are picked up one by one from a microscope slide and discharged into a PCR tube observing the beads with the Compass Z,  Zrobo-mounted video microscope.
3)	MPP-200Z Micro Pick and Place Z Robo System 1-PCR8-4 PCR 8-cap strip holder Glass micropipette: straight shape
	Blue beads (about 50 um) are picked up one by one from a microscope slide and discharged into a PCR cap observing the beads with an inverted microscope.
4)	MPP-200Z Micro Pick and Place Z Robo System Glass micropipette: S shape
	Gel beads (about 10 um) are picked up one by one from a well of a 96-well plate and discharged into another well observing the beads with an inverted microscope.

 

All features and specifications subject to change without notice.

 PicoPipet, pico-pipetting device

The PicoPipet is an electronic ultra-small-pipetting device that has an electroosmotic pump in its pipette part. The special pump can easily control microfluidic flows without pulsation. The weight of the pipette part is just 10 g, and that enables precise manipulations.

* Smooth suction, hold and discharge are possible by simple rotating operations.

* The flow rate is 1 nl/min - 5 ul/min.

* A replaceable glass micropipette is connected to the tip of the pipette part.

 

* The pipette part can be operated with a manipulator. (If the target is large, the pipette part can be operated with one hand).

 

PicoPipet holder 40 mm    

The PicoPipet holder is for holding the pipette part and being attached to a manipulator. The light weight helps precise manipulations by a manipulator. The position of the pipette part can be flexible because the angle of holding the pipette part can be changed freely. There are three different holder lentghs; 40 mm, 80 mm, and 150 mm. The 15 mm version has a clamp for fixing the holder to a manipulator.

 

 

J